UPS Dental LED Dust Collector 60W /Electric Micro Motor Grinding Machine 4W rpm

Description

Dental Dust Collector
Specifications
：
Product power
：
60W
Airflow
：
52.45 CFM(1.2m³/min)
Air pressure
：
41.1mmH
2
O
Voltage
：
AC 100/240V, 50/60 Hz
Scalable hose
：
600 mm (L) there are three LED light
Hose diameter:
：
62mm
Surface material/process
：
ABS plastic
Features
：
l  360° flexible rotation square tray&Catheter, 3-way dust collector.
l  The square tray dust collector can easily clean the table dust, keep the table clean and tidy.
l  Three LED spotlight are built in the front end of the catheter.In addition to collecting dust, it can also be used as lighting.
l  Reduce the 96.41% of PM 2.5. Reduce dust and protect the health of user.
l  The filter is replaceable and the maintenance is very convenience.
l  The service life of the motor is about 10,000hrs.
Instructions for use:
1. After unpacking, please check whether the parts of the machine are loose or damaged due to transportation;
2. Please install the machine in a dry, ventilated and cool place;
3. Remove the packing bag of the card king placed on the main unit and put it back into the filter slot;
4. Insert the end of the air duct LED power cord into the check-in plug end;
5. Fix the cover plate to the host, and then fix the air pipe joint;
6. Link power supply;
7. The "FAN" button is the switch button of the host, and the "LED" button is the switch button of the wind pipe LED lighting lamp.
Precautions:
1. Do not insert your fingers into the fan.
2. Be careful not to let water enter the machine.
3. The filter plate cannot be washed with water.
4. Keep out of reach of children.
5. Note: The disposable filter is not sterilized (sterilized) and needs to be replaced regularly.
Product Size
：
l  Product size: 215x199x600mm
l  Single packing
：
Size: 21 x22. 5 x15. 5 cm   Weight: 1.3 kg
l  Packing quantity
：
12 sets/carton   Size: 43*46*47.5cm    Weight: 15.8 KG
&
MicroMotor
Specifications
l  Main part
1. Rated voltage :110V/60HZ, 220V/50HZ
（
Please set the voltage before using the machine
）
2. Power Input:  110V AC  60HZ
220V AC  50HZ
2. Out voltage: DC 0 - 32V
3. Power: 65W Max
4.
Rated Speed:
-Main power controller: 1000 - 45000RPM (Max)
-Grinder handle: 1000-40000RPM(Max)
The power controller can be matched with 35K, 40K, 45K grinding machine handle.
5. Plug: EU/US
l  Suitable for bur size: 2.35mm
Instructions
1. Don't change the turning directions too frequently,otherwise
，
it will damage the grinding head.
2. Turn the speed control counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
3. After operation put the grinding head on the top of the mail panel.
4. When adjusting the speed, do not press the right switch button, wait for the handle stop and then press.
5. Furlong idle time,please disconnect the source power.
Warranty:
Control box or foot pedal- 1year.
Warranty dose not include bearings or normal wear of bearing, carbon brush
，
collect chuck, spindle and armature.
Packing list:
1. Control box *1pcs
2. Motor handpiece *1pcs
3. Foot control *1pcs
4. Handpiece stand *1pcs
5. Handpiece holder *1pcs
6. Manual *1pcs