-40%
Toner Reactive Foil Paper Hot Stamping Foil Gold Foil By Laser Printer Laminator
$ 4.37
- Description
- Size Guide
Description
EASY DIY Foil with a Laminator and Laser PrinterStep 1: Print your patterns on regular paper or card stock with your laser printer;
Step 2: Next, roll out your toner-reactive foil over your paper, shiny side up. Make sure it covers all of the black ink on your paper;
Step 3: Trim the foil so that it fits perfectly over the sheet of paper;
Step 4: Place a piece of card stock over the top of the foil to hold the metallic foil in place;
Step 5: Now that you have sandwiched your foil between the two pieces of paper, run it through your laminator. Sometimes you need to do this twice or three times just to make sure the foil reacts to the toner as well as you want it to;
(TIP: Make sure your laminator is warmed up properly before use. )
Step 6: Your foil will be attached to the bottom sheet of paper. Peel it off slowly.
Description:
All Size:
5mx19.3cm
Conversion:1cm =0.39 inch
Package included :
1X Foil Paper
Please note:
1.please check the dimensions of the parts carefully before buying!
2. Due to different producing batches, there may be 1-2mm deviation for the items.
3.Under different lights. on a computer screen. There will be a small difference in color. Please, check the actual product.
Feedback:
If the products and services from us are satisfied,your positive feedback and 5 stars of Detailed Seller Ratings is highly appreciated.
We aim at to make sure you have pleasant shopping with us. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
We understand the feeling and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the chance to resolve any problem.