Honda CB500F Lowering Link 2013 2014 2015 2016 2017 2018 CB-500FA CB500F

Description

You are looking at one Pro-tek CNC billet fully adjustable lowering link kit
(Pro-tek Part No. LL-245)
that
replaces the single stock link
on a
2013-2018 Honda CB-500F/FA.
This link is made up of a Carbon Steel hex turnbuckle center and two hardened steel rod ends that have ball bearings with a lube-free teflon race. It also comes with adjusting nuts to tighten down when the desired ride height is reached. It also has four aluminum bushings for easy fitment. These aluminum bushings inserted into the rod ends make this link the same thickness as your stock link. This means your stock bolts and nuts are retained and the locking element of the nuts will still be engaged.
Hardened Steel rod ends with teflon race are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading.
The center hex turnbuckle is carbon steel, case hardened and then zinc plated to protect against oxidation and corrosion.
Fully Adjustable Links allow you to make infinite adjustments on the fly without having to unbolt the lowering link and disassemble the rear suspension every time you raise or lower the bike. You simply loosen the nuts and turn the center piece to find the desired ride height and then re-tighten down the adjusting nuts to secure in place. Its that easy.
SUSPENSION LINK SPECIFICATIONS
END TO END
EYE CENTER TO EYE CENTER
MAXIMUM CLOSED
6.75 (171mm)
5.375”(137mm)
MAXIMUM OPEN
7.875” (200mm)
6.50” (165mm)
ROD END WIDTH
1.63” (41.28mm)
This kit is brand new in original packaging, manufactured in the USA, and comes complete with manufacturer warranty.
These links come with
infinite settings
that lower the bike from
stock to 4"
.
NOTE: NOT FOR USE WITH STRUT, AIR RIDE OR SWINGARMS LONGER THAN 8" OVER STOCK LENGTH!
**
Note: For Fully Adjustable Lowering Links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. There is wiggle room in shock bolts if shock is touching the link.
However, w
hen adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance .
The retail price for this kit is 9.95.
All items will ship within 1 business day upon cleared payment and will ship US Mail.
These are
American made from solid billet carbon and stainless steel, 100% CNC machined from a name you can trust - Pro-tek.  Pro-tek is one of the leading US manufacturers in the motorcycle industry now for over 20 years.   These are not inferior grade cast Chinese made links that are currently flooding the internet.