-40%
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes
Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes

Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Brushes

$ 9.41

Availability: 273 in stock
  • Condition: New
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Intended Use/Discipline: Dental Laboratory
  • MPN: Handler Chucks
  • Brand: Handler

    Description

    Handler Chucks Lathes Dental Tapered Shafts Changing of Burs, Mandrel, Abrasives, Buffs and
    Brushes
    Handler precision chucks are manufactured of alloy steel, brass or hardened steel.
    Handler chucks are made in various designs to provide manual, semi-automatic and automatic changing of burs, mandrels, abrasives, buffs and brushes.
    Chucks made by Handler are known the world over for functionality and reliability.
    All Chucks shown are for placement onto lathes with standard dental tapered shafts.
    All Chunks have Right or Left types.
    CHUCKS & SPINDLES
    7 TAPERED STEEL CHUCK
    7B TAPERED BRASS CHUCK
    8T JACOBS TYPE JR. CHUCK
    9 ARBOR BAND
    12 STONE CHUCK
    13 ARBOR BAND CHUCK
    13-1 TAPERED CHUCK (1.3 cm or 1.6 cm)
    7 TAPERED STEEL CHUCK
    The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts. Specify 7L (Left) or 7R (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9cm]
    7B TAPERED BRASS CHUCK
    The 7B tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. The 7B Tapered chuck is made of brass to provide easier on/off placement onto tapered dental shafts, causing less shaft wear. Specify 7BL (Left) or 7BR (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9 cm]
    8T JACOBS TYPE JR. CHUCK
    The 8T is designed specifically for use with small burs and mandrels which do not exceed 1/4” [6.3mm] in diameter. The 8T is built to be a less expensive and semi-precise adjustable chuck for use on lathes with tapered shafts. This chuck opens with a CCW twist and closes with a CW twist.
    Specify 8T (right) or 8T-L(left) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 2 1/4” L x 1” Shank Diameter [6cm x 3cm]
    9 ARBOR BAND
    Designed to accommodate 3/4” diameter x 3/4” wide [1.9cm x 1.9cm] abrasive bands. Manufactured of alloy steel and plated to fit onto standard dental tapered shafts, the abrasive band is held in place by tightening the end screw against the rubber arbor. Specify 9L (Left) or 9R (Right) when ordering. Shipping Wgt.: 8 oz [227 g] Unit Dimensions: 4 7/8” L x 5/8” Shank Diameter [12cm x 2cm] with a 1/4” Shank Diameter.
    12 STONE CHUCK
    Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks.This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated. Specify 12L (Left) or 12R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 3/16” long x 3/4” Shank Diameter [6cm x 2cm] with a 1/4”Shank Diameter.
    13 ARBOR BAND CHUCK
    Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. Accepts 3/4”x 3/4” [1.9cm x 1.9cm] abrasive arbor bands. Manufactured of alloy steel and plated. Specify 13L (Left) or 13R (Right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 3/4” Shank Diameter [7cm x 2cm] with a 1/4” Shank Diameter.
    13-1 TAPERED CHUCK
    Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. This tapered chuck is built to accept small buffs, brushes and lead-centered wheels. Made of alloy steel and plated. Specify 13-1L (left) or 13-1R (right) when ordering. Shipping Wgt.: 4 oz [113 g] Unit Dimensions: 2 5/8” L x 1/2” Shank Diameter [7cm x 1.3cm] with a 1/4” Shank Diameter.
    A tapered chuck manufactured of steel alloy for use on 1/2" [1.3cm] straight or 5/8" [0.6cm] straight shafts. Available for the Left or Right side of a polishing motor. This chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with screws. Please specify shaft diameter and Left or Right Position.
    20L - 1/2" [1.3cm]
    20R - 1/2" [1.3cm]
    20L- 5/8" [1.6cm]
    20R - 5/8" [1.6cm]
    YOUR #1 DENTAL SUPPLIER
    If you have any questions, please message us
    ERA DENTAL SUPPLY
    We Do Not ship on weekends and Holidays. The buyer has 14 to 30 days to return the item (the buyer pays shipping fees). The item will be refunded. (Returned items must not be used)
    International Buyers, Please Note: Import duties, taxes, and charges (typically collected upon delivery or pickup) are the buyer's responsibility and are not included in the item price or shipping charges. Please check with your country's customs office prior to bidding/buying to determine what these additional costs will be.
    Disclaimer
    "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."