CARBON FIBER FABRIC 4X4 TWILL 3K 281.42GSM/8.3OZ 50" with Web-Lock Stabilization

Description

Ebay Listing
CARBON FIBER FABRIC 4X4 TWILL 3K 281.42GSM/8.3OZ 50" with Web-Lock Stabilization
4x4 Twill Carbon Fiber Fabric/Cloth 50" 3k 8.3oz
. This fabric has a width of 50" , tow size of 3k and is woven in a 4x4 twill weave. This is a very unique weave and gives an appearance unlike anything else. The weave allows this fabric to drape very easy and this material is very easy to work with. This material is woven tighter than most of our competitors' fabrics. This will help ensure a straight weave and a better looking final product.
This material has been Stabilized using our EXCLUSIVE Web-Lock Stabilization Technology.
This material is a high grade
PAN fiber
, which means you are receiving a higher quality material than many of the other fabrics on the market.
Composite Envisions would like to introduce you to our newest product offering, Web-Lock. Web-Lock is a fabric stabilization process that is achieved by applying high heat and pressure to lock every filament of fabric together, ensuring perfect cosmetic and structural symmetry. Currently, this process is ONLY offered by Composite Envisions. You may have seen or tried stabilized fabrics in the past, but we've found that these existing products can often be too stiff to work with, require large volume orders with high costs, or simply aren't available in the fabric or time frame needed. All these reasons lead us to one solution - Web-Lock. Web-Lock is the material that we believe solves all the current problems and exceeds the finished fabric performance on all levels. Web-Lock will help you improve your ease of manufacturing, saving you time and money.
Advantages of Web-Lock
Web-Lock is applied at Composite Envisions, allowing flexibility of coating options. Currently, Web-Lock has been applied to Carbon Fiber, Kevlar, Fiberglass and will be available on other composite fibers.
Low MOQs. Can be applied to smaller runs of fabric, up to full 100+ yd rolls.
Reduce employee training for the time it takes to make quality composites.
Reduce waste as a result of less damaged cloth.
Standard heat range is 225F/107C. Coatings can range from 194F/90C to 392F/200C (only capable now of doing up to 248F/120C material)
Current version only adds .175oz/6gsm of weight to the fabric for little interference. (weights available from 4-15gsm to change performance characteristics)
No release liner required between layers of material; reduces waste, lowers cost and makes material easier to use.
Compatible with most resin systems on the market, including polyester, vinylester and epoxy resin.
Can be applied to various widths ranging from narrow tapes to 50" wide.
Prevents fabric weave from shifting but stretches to allow the fabric to stay conformable.
Keeps fiber coverage even to avoid resin rich areas and failure points.
Produced in the USA. Our goal is to make Web-Lock the new standard for high-end composite fabrications meet your supply needs while exceeding your expectations.
To harden the raw fabric into a usable form, you will need the appropriate epoxies or resins for your project. For the colored materials, we suggest one of our resins which cure clear.
We take care in shipping our items and we will never fold the fabric. Our fabric is always rolled onto a tube to prevent distortion of the weave.
This item is listed by the linear yard, which is 36" long by the 50" width. If you purchase a qty of 2, you will receive one continuous piece of fabric 72"x50" and so on. We will leave the fabric in one continuous piece.
Product Specs
Unit of Measure
Linear Yard
Material Warp
Carbon Fiber
Material Weft
Kevlar
Weave
2x2 Twill
Ends Per Inch
12.5
Pics Per Inch
14
Yarn Size Warp
3k
Yarn Size Weft
1500d
Tow Size
3k X 1500d
Weight
5.5oz / 186.48gsm
Width
50" / 127cm
Thickness
0.009" / 0.23mm
Resin Consumption
6.25opsy / 211.91gsm @ 40% Resin to Fabric
Copyright 2017 Elite Motoring | All Rights Reserved