-40%

alesis remote meter bridge (RMB) 32 channel meter bridge only for use with BRC

$ 58.07

Availability: 100 in stock
  • Model: RMB
  • All returns accepted: ReturnsNotAccepted
  • Instrument: Alesis BRC accessory.
  • Condition: In very good working condition with original Alesis QC Label affixed to back, Powers on and All LEDs operate. Buttons function well. Includes IEC (power cord)

    Description

    The ALESIS RMB Remote Meter Bridge is designed to give you instant level information by providing 15-segment LED bar graph meters for up to 32 tracks.  In- addition, LED indicators are provided for displaying the record and input status of each track. The RMB is perfect for mounting atop the BRC Master RemoteControl, or in a standard 19" equipment rack, or it can be installed above your mixing console. Here are some of the features the RMB will provide : 32 channel meter, 15-segment LED bar graph meters keep you informed of the level  for up to 4 (ADATs). The meters have two decay speeds, fast and slow, which control the time it takes for ihe level indicators to fall back down when audio is no longer present or the tape transport is stopped. Selectable peak mode. Each time a track's level reaches a new peak, the corresponding LED on the RMB will either remain lit momentarily, or continuous peak, or not at all, depending on the mode you select from the front panel. All peak LEDs can be instantly cleared from the display with the press of a single button. ADAT interaction: Not only does the RMB display the levels of each ADAT track ,it also adjusts each ADAT bar graph display to match the RMB's configuration. If you select Momentary Peak Mode, the ADATs will also be set to the same mode automatically. When you clear the peak LEDs on the RMB, the peaks in the ADAT's displays are also cleared. Easy hookup and operation.The RMB can either be mounted atop the BRC, or rack-mounted in a standard 19" equipment rack. Four dual male, 9-pin D connector cables are required to link the RMB with up to four ADATs. Voltage-tolerant power supply. The RMB accepts any AC voltage between 90 and 250 volts.   see photos.  thanks for Looking!