5M Toner Hot Stamping Paper By Laser Printer and Laminator for Diy Paper Cards

Description

※
How to reduce your shipping cost
※
Orders (not including shipping costs) over US will be shipped free of charge.
※
If the order does not reach US , only one shipping fee will be charged.
※
Description
※
Condition: High quality thin metal cutting dies made of 100% steel
※
Specifications
※
Color:
Please click on the option to choose.
※
Size
:
5
Meter X 19.3 Centimeter (196.85 X 7.6 inch)x1 Roll
※
Conversion:1cm =0.39 inch
※
Suitable for making greeting cards, wedding invitations, etc.
※
Works in most major brands of
Laser printers and laminators.
※
EASY DIY Foil with a Laminator and Laser Printer
※
※
Step 1: Print your patterns on regular paper or card stock with your laser printer;
※
Step 2: Next, roll out your toner-reactive foil over your paper, shiny side up. Make sure it covers all of the black ink on your paper;
※
Step 3: Trim the foil so that it fits perfectly over the sheet of paper;
※
Step 4: Place a piece of card stock over the top of the foil to hold the metallic foil in place;
※
Step 5: Now that you have sandwiched your foil between the two pieces of paper, run it through your laminator. Sometimes you need to do this twice or three times just to make sure the foil reacts to the toner as well as you want it to;
※
(TIP: Make sure your laminator is warmed up properly before use. )
※
Step 6: Your foil will be attached to the bottom sheet of paper. Peel it off slowly.
※
Please Note
※
please check the dimensions of the parts carefully before buying!
※
Due to different producing batches, there may be 1-2mm deviation for the items.
※
Under different lights. on a computer screen. There will be a small difference in color. Please, check the actual product.