Radiolucent Surgical Table Arm Board Anesthesia / Surgery Articulating Arm Board

Description

This radiolucent surgical table arm board rotates 180 deg. and locks in place with a spring loaded pin, it clamps to standard surgical table side rails with a standard clamp that has a rectangular opening.  All of the metal used (except for the locking pin & nob) is non magnetic stainless steel & aluminum.  The flat bar on the board that goes into the side rail clamp is long enough to provide 2" of vertical adjustment.
There are some light scuffs and three chips, one on a top corner & small chip on the bottom corner of the outer end, the third is on the top inner edge, see the last three close ups.  The Velcro was cleaned of all lint and hair, it's in good shape and sticks well.  Please zoom in on all photos.
The board is 23 3/4" long X 6" wide, the flat bar that goes into the clamp is .975" X .250", it will fit the newer combination Clark type sockets with the rectangular & round holes or the small clamps made for this type of bar.
There are two identical arm boards available with mounting clamps under item #
124475500559.
There are multiple shipping options.
"The sale of this item is subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.  Do not purchase this item unless you are an authorized purchaser. Because this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item."